Wall thickness does not affect pipe or tubing size.[20] 1/2" L copper has the same outer diameter as 1/2" K or M copper. The same applies to pipe schedules. As a result, a slight increase in pressure losses is realized due to a decrease in flowpath as wall thickness is increased. In other words, 1 foot of 1/2" L copper has slightly less volume than 1 foot of 1/2 M copper.[citation needed]
The difference between pipes and tubes is simply in the way it is sized. PVC pipe for plumbing applications and galvanized steel pipe for instance, are measured in IPS (iron pipe size). Copper tube, CPVC, PeX and other tubing is measured nominally, which is basically an average diameter. These sizing schemes allow for universal adaptation of transitional fittings. For instance, 1/2" PeX tubing is the same size as 1/2" copper tubing. 1/2" PVC on the other hand is not the same size as 1/2" tubing, and therefore requires either a threaded male or female adapter to connect them. When used in agricultural irrigation, the singular form "pipe" is often used as a plural.[19]
Our water heater busted on Saturday. Sean came right out and was very informative and helpful. He explained that they would need to secure our type of water heater and once successful he would be out first thing Sunday morning to install it. He was here first thing at 7:30 AM with a smile on his face and removed the old water heater and installed the new one in no time. Sean is very knowledgeable and personable. My husband and I enjoyed talking about Football with him while he was here. I would also like to mention Tiffany, the dispatcher, she was great as well, very helpful when I made the initial call. I would definitely recommend Atomic Plumbing and Sean to anyone needing plumbing work done in the future.
Using corrosive chemicals to dissolve a clog is like throwing a grenade down a gopher hole. Instead, Wroblewski recommends flushing your drains weekly with a half cup of baking soda and one cup of vinegar. Let it fizz in the drain for ten minutes, then pour in four cups of boiling water. Find out about the plumbing nightmares that will make you cringe.
Mounted under the sink, the garbage disposal is meant for chopping up small bits of waste food.  When switched on the motor spins and impellers — also called lugs — throw bits of food against a grinder ring. You should always run water while using the garbage disposal; once the garbage disposal does its job, the water flushes the finely chopped particles down the drain.
“We had a toilet emergency one morning. After unsuccessful plunging efforts, we called Intelligent Service – and within 20 minutes, they were at our house. They found that the sewer line from our house to the street had snapped. Within 2 hours they had a permit and a backhoe in our front yard, and started work. By 5:00pm, we had water! They were extremely sympathetic to our situation. They were careful not to track snow and mud into the house. They cleaned up the area both inside and outside. Have already recommended the company to the many neighbors.”

I am not a plumber, but I am familiar with oxidation.  Many simple plumbing valves only need to be removed and new "O" rings installed.  That's where the problem comes in.  Most older homes used metal pipes and not PVC.  Usually the valve screws into a different type of metal and oxidation occurs between the two metals, almost becoming one.  In order to get the valve stem out you have to break it loose.  If you break the pipe, not only do you have a mess but then you have to pay to fix it.  Simple if you break it you pay.  If a plumber breaks it, he is responsible.  I recommend paying the plumbers fee and save yourselves headaches in the long run. 


 Justin and Paul were extremely polite. They worked as quickly as they could and got my hot water heater replaced. I have two dogs that are a handful, and they learned their names and talked to them to help keep them calm, which meant a lot to me. I felt comfortable having them in my home. The customer service at the company was great as well, very helpful on the phone. I would recommend them. 

Much of the plumbing work in populated areas is regulated by government or quasi-government agencies due to the direct impact on the public's health, safety, and welfare. Plumbing installation and repair work on residences and other buildings generally must be done according to plumbing and building codes to protect the inhabitants of the buildings and to ensure safe, quality construction to future buyers. If permits are required for work, plumbing contractors typically secure them from the authorities on behalf of home or building owners.[citation needed]
Similarly, there's no shortage of different types of sinks, too. These range from spare single-bowl models starting under $100 to a farmhouse apron front, double bowl made of copper or cast iron that can run $600 or more. Some are mounted under countertops — called undermount sinks — while drop-in sinks are designed for installation in a preexisting space in your countertop. Whatever the type, sinks can uniquely complement kitchen design as do countertops, cabinetry and other features.
Payment schedule: On a big job, especially a planned remodeling, the service provider may want the customer to pay 10 to 15 percent of the cost up front and 50 percent paid before the job is completed — especially if expensive materials need to be purchased for the project. Make sure you know what is expected. If you're suspicious, contact your state's professional licensing board or contracting board to ask about local standards. Many states set limits on what is allowed to be paid upfront.
Our water heater busted on Saturday. Sean came right out and was very informative and helpful. He explained that they would need to secure our type of water heater and once successful he would be out first thing Sunday morning to install it. He was here first thing at 7:30 AM with a smile on his face and removed the old water heater and installed the new one in no time. Sean is very knowledgeable and personable. My husband and I enjoyed talking about Football with him while he was here. I would also like to mention Tiffany, the dispatcher, she was great as well, very helpful when I made the initial call. I would definitely recommend Atomic Plumbing and Sean to anyone needing plumbing work done in the future.
 This was Roberts fourth visit to her home, each time for different services and Zach‘s first. As always Tiffany in the office as well as the rest of the staff are more than communicative prior to the visit and keep you up-to-date on the travel time of the technician. The technicians are friendly, intelligent, accommodating, and beyond respectful and neat. I highly recommend Atomic Plumbing for any residential or commercial needs and would like to thank them for their personalized attention to our home. 

You need the right tools when repairing your plumbing systems or installing new devices. Menards® has a large variety of plumbing tools, including pipe threading; plumbing hand tools; plumbing tool kits; and torches and soldering tools. Keep your drains clean and free of clogs with our drain cleaning equipment and supplies, including hand, chemical, and powered solutions.
PlumbersNearYou.com is the number one directory for plumbing services. Plumbing service is a must when facing plumbing system issues, at home or work. With plumbing repair and service, your plumbing systems will be up and running before you know it - from waste removal systems to water pipes, to all systems in between, plumbing repair and services can bring functionality back to your home or office. With thousands of plumbers and service shops listed, and more added each day, PlumbersNearYou.com will help you find the most affordable and reliable plumbing service in your area.
Plumbers, pipefitters, and steamfitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination.
“Don’t assume that every Mr. Fix-it advertising his services in the local Pennysaver or on Craigslist is a licensed plumber,” says one New York plumber. There is no national standard for issuing licenses. Some plumbers are licensed by the state, others by the counties they work in. Check with your local city hall or chamber of commerce. They should be able to direct you to the appropriate source for a list of licensed plumbers in your area.

Most plumbers, pipefitters, and steamfitters learn their trade through a 4- or 5-year apprenticeship. Apprentices typically receive 2,000 hours of paid on-the-job training, as well as some classroom instruction, each year. In the classroom, apprentices learn safety, local plumbing codes and regulations, and blueprint reading. They also study mathematics, applied physics, and chemistry. Apprenticeship programs are offered by unions and businesses. Although most workers enter apprenticeships directly, some start out as helpers. The Home Builders Institute offers a pre-apprenticeship training program in plumbing and other trades.
As with other construction workers, employment of plumbers, pipefitters, and steamfitters is sensitive to fluctuations in the economy. On the one hand, workers may experience periods of unemployment when the overall level of construction falls. On the other hand, shortages of workers may occur in some areas during peak periods of building activity.

Called at 2pm and had service completed by 6pm on a cold any busy day with lots of frozen pipes. Extremely fast and took the time to communicate both the issue, and associated costs of repair. Also very communicative for when someone would be by. Got an update call from the service center saying “we are a bit busy but you are still in the schedule for today”. Much appreciated so I could plan my afternoon while waiting. Highly recommended.


The plumbers at Benjamin Franklin Cedar Rapids and Eastern Iowa have provided excellent quality plumbing to the Cedar Rapids and Eastern Iowa community since 1993. We are proud of Benjamin Franklin’s tradition of friendly customer service and are happy to be Cedar Rapid’s Better Business Bureau certified plumbing repair, maintenance, and installation choice.
Most large cities today pipe solid wastes to sewage treatment plants in order to separate and partially purify the water, before emptying into streams or other bodies of water. For potable water use, galvanized iron piping was commonplace in the United States from the late 1800s until around 1960. After that period, copper piping took over, first soft copper with flared fittings, then with rigid copper tubing utilizing soldered fittings.
Prices as quoted ($500-781) OBVIOUSLY included the cost of the toilet. In my quote request I stated project was a totally unremarkable - removal of old toilet and install of the new toilet, which I will have purchased myself. There are no problems and this is not an old house. Simply want t upgrade from contractor grade toilet. I am a retired contractor with a bad back and I know what the project entails.
Cast iron and ductile iron pipe was long a lower-cost alternative to copper, before the advent of durable plastic materials but special non-conductive fittings must be used where transitions are to be made to other metallic pipes, except for terminal fittings, in order to avoid corrosion owing to electrochemical reactions between dissimilar metals (see galvanic cell).[17]

We had a leak under the kitchen sink & called Atomic Plumbing. They sent someone over that same day. They sent an email appointment confirmation & kept us posted both via email & telephone on the status of our appointment & expected arrival of the plumber. Our plumber was Don Richards. He was very pleasant and professional. He used protective covering on his shoes & went over the cost of the repair. He fixed the leak in no time and did not leave a mess at all. Very impressive. Thanks for the outstanding service Atomic Plumbing!
Called in on Wednesday evening to schedule a new sink hookup and was put on the schedule for Friday morning with no problems. Ryan arrived and took a look at what I had, gave some recommendations and provided a couple quotes. He took his time and made sure everything he installed was the most efficient and correct for my setup. We will continue to use and strongly recommend Atomic Plumbing.
When you need honest, reliable plumbing, heating, or cooling services in Northern Virginia, suburban Maryland, or throughout the D.C. area, look no further than My Plumber Heating and Cooling! We’re proud to be the region’s number one choice for home comfort since 1982. Whether you’re dealing with a broken air conditioner, outdated heating system, backed-up drain, or burst pipe, our highly trained team is ready to help. We offer everything from emergency plumbing repairs to new heating and air conditioning system installation to indoor air quality services and more. Most of all, we stand behind everything we do with extensive warranties and our 100% customer satisfaction guarantee. At My Plumber Heating and Cooling, your comfort is our priority! We have three convenient locations in Manassas, Fairfax, and Fredericksburg so that you don't have to wait to get the help you need. 

Rooter Plumbing Co

×