The difference between pipes and tubes is simply in the way it is sized. PVC pipe for plumbing applications and galvanized steel pipe for instance, are measured in IPS (iron pipe size). Copper tube, CPVC, PeX and other tubing is measured nominally, which is basically an average diameter. These sizing schemes allow for universal adaptation of transitional fittings. For instance, 1/2" PeX tubing is the same size as 1/2" copper tubing. 1/2" PVC on the other hand is not the same size as 1/2" tubing, and therefore requires either a threaded male or female adapter to connect them. When used in agricultural irrigation, the singular form "pipe" is often used as a plural.[19]
My hot water heater needed replacement. Deanna was very pleasant, knowledgeable, and most helpful. She scheduled my appointment and James M. and Aaron arrived exactly on time. They were professional and had the job done in no time! Although it was a bit more expensive than I was expecting, the service was excellent. Thank you for a job well done.
Pipe is available in rigid "joints", which come in various lengths depending on the material. Tubing, in particular copper, comes in rigid hard tempered "joints" or soft tempered (annealed) rolls. PeX and CPVC tubing also comes in rigid "joints" or flexible rolls. The temper of the copper, that is whether it is a rigid "joint" or flexible roll, does not affect the sizing.[19]
Plumbers may not go out of their way to let you know that a toilet or sink can be moved. But if you’ve been working with them on a renovation, and they tell you something can’t be transferred to a new space, ask them to explain to you in detail why not. Speaking of things people don’t want to tell you, here are 10 things your neighbor isn’t being up-front about.
Becoming a plumber is a two-pronged process that includes practical training and study. Traditionally, a hopeful plumber begins a four- or five-year apprenticeship program to receive technical education and complete the required hours of on-the-job training under a licensed professional. Plumbers who have successfully completed their apprenticeship are known as journeymen.
Had a main line back up on a cold rainy day. I checked google for a reliable plumber and called the first one that came up which was Atomic. Called and talked to DeAnne and she was very helpful. She had Ryan call me and I told him what was going on, he told me he would be here in 15 minutes. 12 minutes later Ryan pulled in and I showed him the problem, he told me the price and I told him to go for it. Ryan had this power snake the likes of which I have never seen before, it not only powered through the clog with no problem he was able to tell me how far down the pipe the clog was to within a couple of feet by the number of sections he used to reach it. To be on the safe side He ran the snake a few feet past the clog which put it just past the city clean out.Both DeAnne and Ryan were courteous and professional and got my problem resolved quickly and at a reasonable cost.I will be recommending Atomic to everyone I know. Hopefully Ryan will be able to take care of others with his wonder snake.

While it’s their job to make sure your pipes work like a well-oiled machine, it’s not their job to rebuild the wall they had to demolish to make that happen. So, while you’re going to get that water problem fixed, you’ll want to discuss in detail what kind of “mess” they might leave behind prior to the start of the project so you can plan accordingly. Remember, there are some jobs you can do yourself. Here’s how to solder copper pipe joints!
It does help in regards to procedures and rules in order to better understand your options.  Obviously cost is always an issue and the size of the company probably determine the labor cost.  That is why some times people take chances with "others' hoping that there have good experience but because they are independent operators there pricing might be more flexible.
Jimmy P removed a 6 inch diameter root that had grown around my main water line. He was diligent in finding our the cause of the leak, kept me informed throughout the process and made sure that I was up and running with water for my family in less than an 8 hour period. It was a huge undertaking. Jimmy P was first class and polite . The had the necessary experience that was needed to get this water main break under control. He made the best of a horrible situation. Extremely pleasant and talented. I would highly suggest that all of my friends request Jimmy P at ATOMIC!

The difference between pipes and tubes is simply in the way it is sized. PVC pipe for plumbing applications and galvanized steel pipe for instance, are measured in IPS (iron pipe size). Copper tube, CPVC, PeX and other tubing is measured nominally, which is basically an average diameter. These sizing schemes allow for universal adaptation of transitional fittings. For instance, 1/2" PeX tubing is the same size as 1/2" copper tubing. 1/2" PVC on the other hand is not the same size as 1/2" tubing, and therefore requires either a threaded male or female adapter to connect them. When used in agricultural irrigation, the singular form "pipe" is often used as a plural.[19]


 Atomic Plumbing & Drain Cleaning provided Expert Plumber Jimmy Powell to diagnose and perform an emergency repair at my home. I had experienced flooding from poor workmanship by one of their competitors, who then refused to help me. When I contacted Atomic Plumbing with an emergency request, they stepped up immediately to assist me, and sent their plumber Jimmy P., who identified and corrected the poor workmanship that caused the flooding. Very knowledgeable in his trade, confident in the correction that he crafted, and he is a genuine good person. I would have been pleased with that much, but the reasonable price for the emergency work and the 1 year warranty that Jimmy presented on behalf of Atomic Plumbing brought it all home for me. This is a company that stands behind their good name and will send you the very best plumbing professionals when you are having a bad plumbing day. I am so glad that I contacted Atomic and met Jimmy. You will be too. Call Atomic Plumbing FIRST! 

Mounted under the sink, the garbage disposal is meant for chopping up small bits of waste food.  When switched on the motor spins and impellers — also called lugs — throw bits of food against a grinder ring. You should always run water while using the garbage disposal; once the garbage disposal does its job, the water flushes the finely chopped particles down the drain.
I am not a plumber, but I am familiar with oxidation.  Many simple plumbing valves only need to be removed and new "O" rings installed.  That's where the problem comes in.  Most older homes used metal pipes and not PVC.  Usually the valve screws into a different type of metal and oxidation occurs between the two metals, almost becoming one.  In order to get the valve stem out you have to break it loose.  If you break the pipe, not only do you have a mess but then you have to pay to fix it.  Simple if you break it you pay.  If a plumber breaks it, he is responsible.  I recommend paying the plumbers fee and save yourselves headaches in the long run. 
PBT – flexible (usually gray or black) plastic pipe which is attached to barbed fittings and secured in place with a copper crimp ring. The primary manufacturer of PBT tubing and fittings was driven into bankruptcy by a class-action lawsuit over failures of this system.[citation needed] However, PB and PBT tubing has since returned to the market and codes, typically first for "exposed locations" such as risers.
We had a leak under the kitchen sink & called Atomic Plumbing. They sent someone over that same day. They sent an email appointment confirmation & kept us posted both via email & telephone on the status of our appointment & expected arrival of the plumber. Our plumber was Don Richards. He was very pleasant and professional. He used protective covering on his shoes & went over the cost of the repair. He fixed the leak in no time and did not leave a mess at all. Very impressive. Thanks for the outstanding service Atomic Plumbing!
Boiler problems like these could be caused by a faulty pump, mineral build up or air in the heating pipes of your boiler. On average, the boiler life span is around 10-15 years. You might consider replacing an older boiler with a more modern boiler. Heating technology has significantly advanced in the past 20 years. A new, energy efficient boiler will pay for itself quickly with the energy you save.

Clogged drains or sewer line backups can wreak havoc on your business, and we know that plumbing emergencies rarely align with business hours. Sudden, unexpected plumbing emergencies can have a serious negative impact on your business—any amount of downtime can result in missed opportunities and the inability to serve your clients, potentially leading to lost revenue. When plumbing emergencies occur at your place of business, you need an emergency plumber you can trust.
I have used Atomic Plumbing a few times, and they have provided excellent service each time. Yesterday I called to have a sewage leak in my crawl space fixed. The office offered to try to fit me in the same day I called but as I had plans to be out, they offered to give me an early morning appointment instead. I was given a courtesy call 30 min prior to the arrival of 2 technicians. They were professional and friendly and assessed the problem. They explained the problem and their solution and proposed a fair estimate. The repair was completed in less time than they estimated. I would highly recommend this company to anyone needing plumbing repair.

An apprenticeship is the most common pathway to becoming a plumber. Many unions and businesses mandate that an apprentice receive a minimum of 246 hours of technical education, which could include instruction in math, applied physics and chemistry, and up to 2,000 hours of paid, practical training working with an experienced plumber. Safety training is also an important component of the process, since injuries are common in this line of work. "We have many hours worth of [Occupational Safety and Health Administration] training before we go on to a job site," says Patrick Kellett, the administrative assistant to the general president for the United Association of Journeymen and Apprentices of the Plumbing, Pipe Fitting Industry of the United States, Canada and Australia. "We're very conscious of the dangers that come with working in construction."

Apprentice plumber: Apprenticeship programs generally provide the most comprehensive training for novice plumbers. Either union locals and their affiliated companies or nonunion contractor organizations can administer this training. Apprenticeships typically consist of at least three to four years of paid, on-the-job training and some hours of related classroom instruction.
×