Most typical single family home systems won't require supply piping larger than 3⁄4 inch (19 mm) due to expense as well as steel piping's tendency to become obstructed from internal rusting and mineral deposits forming on the inside of the pipe over time once the internal galvanizing zinc coating has degraded. In potable water distribution service, galvanized steel pipe has a service life of about 30 to 50 years, although it is not uncommon for it to be less in geographic areas with corrosive water contaminants.

If you decide to try this job yourself, be prepared to keep meticulous track of about a dozen tiny parts (put the stopper in the sink so none of them fall down the drain). There are many different faucet designs, so you may not be able to tell what to replace until you've done the disassembly. Whether you do it yourself or hire a plumber, this would be a good time to think about whether you want to upgrade the faucet with a new design.
JAG PLUMBING PRODUCTS is very pleased to partner JAG PLUMBING PRODUCTS is very pleased to partner with Briggs Plumbing Products USA to act as the direct distributor of the prestigious Briggs Toilet Repair Parts. This 2-pack of Toilet tank flappers is the exact replacement required to fix your Briggs Toilet. JAG PLUMBING PRODUCTS strives to bring on-line Customers ...  More + Product Details Close
Plumbers develop blueprints to plan where pipes and fixtures should be plotted in a structure. They also install and connect the piping and fixtures, either working individually or with a team of apprentices and pipefitters. In addition to facilitating water supply from pipes and large fixtures, such as bathtubs, showers, sinks and toilets, plumbers ensure that water reaches appliances like dishwashers and water heaters. The best in the occupation are strong problem-solvers who have mastered customer service and can meet the physical and mechanical demands of the job.
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted. 

Plumbing is any system that conveys fluids for a wide range of applications. Plumbing uses pipes, valves, plumbing fixtures, tanks, and other apparatuses to convey fluids.[1] Heating and cooling (HVAC), waste removal, and potable water delivery are among the most common uses for plumbing, but it is not limited to these applications.[2] The word derives from the Latin for lead, plumbum, as the first effective pipes used in the Roman era were lead pipes.[3]
If it’s a toilet issue you’ve got, you’re sure to find the right toilet parts and replacement pieces – including shutoff valves and supply lines – to get your toilet in tip-top shape. We’ve also got shower parts and shower valves, sink parts and faucet parts, as well as everything for bathtub repair – all to get your bathroom up and running in top-top shape.
The thicknesses of the water pipe and tube walls can vary. Pipe wall thickness is denoted by various schedules or for large bore polyethylene pipe in the UK by the Standard Dimension Ratio (SDR), defined as the ratio of the pipe diameter to its wall thickness. Pipe wall thickness increases with schedule, and is available in schedules 20, 40, 80, and higher in special cases. The schedule is largely determined by the operating pressure of the system, with higher pressures commanding greater thickness. Copper tubing is available in four wall thicknesses: type DWV (thinnest wall; only allowed as drain pipe per UPC), type 'M' (thin; typically only allowed as drain pipe by IPC code), type 'L' (thicker, standard duty for water lines and water service), and type 'K' (thickest, typically used underground between the main and the meter). Because piping and tubing are commodities, having a greater wall thickness implies higher initial cost. Thicker walled pipe generally implies greater durability and higher pressure tolerances.

The word "plumber" dates from the Roman Empire.[3] The Latin for lead is plumbum. Roman roofs used lead in conduits and drain pipes[4] and some were also covered with lead, lead was also used for piping and for making baths.[5] In medieval times anyone who worked with lead was referred to as a plumber as can be seen from an extract of workmen fixing a roof in Westminster Palace and were referred to as plumbers "To Gilbert de Westminster, plumber, working about the roof of the pantry of the little hall, covering it with lead, and about various defects in the roof of the little hall".[6] Thus a person with expertise in working with lead was first known as a Plumbarius which was later shortened to plumber.


"lead hung on a string to show the vertical line," early 14c., from Old French *plombe, plomee "sounding lead," and directly from Late Latin *plumba, originally plural of Latin plumbum "lead (the metal), lead ball; pipe; pencil," a word of unknown origin, related to Greek molybdos "lead" (dialectal bolimos) and perhaps from an extinct Mediterranean language, perhaps Iberian.
For details about apprenticeship or other opportunities in this occupation, contact the offices of the state employment service; the state apprenticeship agency; local plumbing, heating, and cooling contractors or firms that employ fitters; or local union–management apprenticeship committees. Apprenticeship information is available from the U.S. Department of Labor's Apprenticeship program online, or by phone at 877-872-5627.
Most plumbers, pipefitters, and steamfitters learn their trade through a 4- or 5-year apprenticeship. Apprentices typically receive 2,000 hours of paid on-the-job training, as well as some classroom instruction, each year. In the classroom, apprentices learn safety, local plumbing codes and regulations, and blueprint reading. They also study mathematics, applied physics, and chemistry. Apprenticeship programs are offered by unions and businesses. Although most workers enter apprenticeships directly, some start out as helpers. The Home Builders Institute offers a pre-apprenticeship training program in plumbing and other trades.
Most plumbers, pipefitters, and steamfitters learn their trade through a 4- or 5-year apprenticeship. Apprentices typically receive 2,000 hours of paid on-the-job training, as well as some classroom instruction, each year. In the classroom, apprentices learn safety, local plumbing codes and regulations, and blueprint reading. They also study mathematics, applied physics, and chemistry. Apprenticeship programs are offered by unions and businesses. Although most workers enter apprenticeships directly, some start out as helpers. The Home Builders Institute offers a pre-apprenticeship training program in plumbing and other trades.

Plumbing Repair

×