Plastic pipe is in wide use for domestic water supply and drain-waste-vent (DWV) pipe. Principal types include: Polyvinyl chloride (PVC) was produced experimentally in the 19th century but did not become practical to manufacture until 1926, when Waldo Semon of BF Goodrich Co. developed a method to plasticize PVC, making it easier to process. PVC pipe began to be manufactured in the 1940s and was in wide use for Drain-Waste-Vent piping during the reconstruction of Germany and Japan following WWII. In the 1950s, plastics manufacturers in Western Europe and Japan began producing acrylonitrile butadiene styrene (ABS) pipe. The method for producing cross-linked polyethylene (PEX) was also developed in the 1950s. Plastic supply pipes have become increasingly common, with a variety of materials and fittings employed.
Len The Plumber is a full service plumbing and drain cleaning company serving the entire Baltimore, Washington D.C., Northern Virginia, Delaware and the Philadelphia Area as well as Anne Arundel, Baltimore, Carroll, Cecil, Harford, Howard, Montgomery, Prince George’s, Charles, Fairfax, Alexandria, Arlington, Loudoun, Prince William, Falls Church, Manassas, Delaware, Chester, New Castle, and Stafford counties. We are continuing to grow and expand our service areas so please continue to check-in to see if we are in your area and always feel free to call if you have a question. Our service area map shows all the counties and district that we currently serve.
We had a leak under the kitchen sink & called Atomic Plumbing. They sent someone over that same day. They sent an email appointment confirmation & kept us posted both via email & telephone on the status of our appointment & expected arrival of the plumber. Our plumber was Don Richards. He was very pleasant and professional. He used protective covering on his shoes & went over the cost of the repair. He fixed the leak in no time and did not leave a mess at all. Very impressive. Thanks for the outstanding service Atomic Plumbing!
Most typical single family home systems won't require supply piping larger than 3⁄4 inch (19 mm) due to expense as well as steel piping's tendency to become obstructed from internal rusting and mineral deposits forming on the inside of the pipe over time once the internal galvanizing zinc coating has degraded. In potable water distribution service, galvanized steel pipe has a service life of about 30 to 50 years, although it is not uncommon for it to be less in geographic areas with corrosive water contaminants.
Plumbers install and repair water, drainage, gas, and other piping systems in homes, businesses, and factories. Plumbers install plumbing fixtures such as bathtubs and toilets, and appliances, such as dishwashers and water heaters. Plumbers also maintain septic systems—the large, underground holding tanks that collect waste from houses that are not connected to a sewer system. Click Here for Plumber Repair Denver
Master plumbers on construction jobs may be involved with developing blueprints that show the placement of all the pipes and fixtures. Their input helps ensure that a structure’s plumbing meets building codes, stays within budget, and works well with the location of other features, such as electric wires. Many diagrams are now created digitally with the use of Building Information Modeling (BIM), which allows a building’s physical systems to be planned and coordinated across occupations.
I needed a neutral place to research plumbing jobs: had the suspicion I was being 'led down a garden path' because I knew nothing - other than how expensive it was and how urgent  'do it NOW!" it was. I appreciate the cost estimate and national average pages which confirmed my suspicions.  I found another plumber through this site and hope for better, less panic, less cost service from now on. Thanks.
According to standards set by the federal government, a low-flow showerhead uses no more than 2.5 gallons of water per minute at a water pressure of 80 pounds per square inch. That’s less than half the rate of water used by some older traditional showerhead models. Low-flow showerheads come in two main types, aerating, which creates a mist, or laminar-flow that sends water out in a steady stream.
Wall thickness does not affect pipe or tubing size.[20] 1/2" L copper has the same outer diameter as 1/2" K or M copper. The same applies to pipe schedules. As a result, a slight increase in pressure losses is realized due to a decrease in flowpath as wall thickness is increased. In other words, 1 foot of 1/2" L copper has slightly less volume than 1 foot of 1/2 M copper.[citation needed]
"We just moved to a new house and Luke did an amazing job installing our home entertainment system. We thought we had a simple TV mounting project, but Luke was able to connect all our equipment (some of which was a bit outdated) so we have one seamless audio/visual system. Plus he was able to fix some errors that Comcast had made and willing to jump in and work on a few other small projects I needed done before the holidays. His price was reasonable and in the week since he performed the work I've had 2 people knowledgeble in contracting or wiring compliment the quality of his work."

The straight sections of plumbing systems are called "pipes" or "tubes". A pipe is typically formed via casting or welding, whereas a tube is made through extrusion. Pipe normally has thicker walls and may be threaded or welded, while tubing is thinner-walled and requires special joining techniques such as brazing, compression fitting, crimping, or for plastics, solvent welding. These joining techniques are discussed in more detail in the piping and plumbing fittings article.
^ "II. The Plumbers". The Atlantic. Retrieved 17 September 2013. In the early evening of June 17, 1971, Henry Kissinger held forth in the Oval Office, telling his President, and John Ehrlichman and Bob Haldeman, all about Daniel Ellsberg. Kissinger's comments were recorded, of course, on the hidden White House taping system, and four years later, a portion of that tape was listened to by the Watergate Special Prosecution Force, which was then investigating the internal White House police unit known as the Plumbers.
As with other construction workers, employment of plumbers, pipefitters, and steamfitters is sensitive to fluctuations in the economy. On the one hand, workers may experience periods of unemployment when the overall level of construction falls. On the other hand, shortages of workers may occur in some areas during peak periods of building activity.
Westbrook knows that quality construction starts with quality plumbing. Our design build experts use the latest techniques and technology to ensure that every building is fitted, piped and pressurized for maximum water flow and efficiency. With Westbrook’s team of plumbing experts, you can be sure that any new building won’t go without clean and safe water service.

Most recently they sent Mike out to snake a kitchen sink drain for us. Mike got here earlier than quoted and got the work done quickly so I could get out of work on time and pick up my little boy from daycare. I called them back to give a compliment about Mike. I like to let them know when they do a good job. Mike was really a great guy. I have nothing but good things to say about them. When we have an issue we call them. Their techs are personable and always make the residents laugh. They are clean and well prepared. It is a real stand up operation.


If you have a major fix in your home, it’s important to shop around for a plumber to do the work. At least three bids will help you determine the range of the project, so you can weigh the pros and cons of price and the reputation of the plumbers. Get references and contact them. Also, a good plumber isn’t likely to nickel and dime you. For the smaller jobs, check out these 11 plumbing tricks.


Ryan arrived on time with a positive attitude even though it was after hours on a Friday and did a great job. He quickly diagnosed and fixed the plumbing problem and answered several other questions I had regarding upgrades to bathroom fixtures. I was very impressed that Atomic was able to get a technician to my house within a few hours on a Friday night a few days before Christmas. Very professional organization and technician.
Do you need professional plumbing work performed quickly? Benjamin Franklin Plumbing is Cedar Rapids and Eastern Iowa’s favorite choice for quality plumbing work and prompt customer service. You have better ways to spend your time than stressing over plumbing tasks. Benjamin Franklin Plumbing Cedar Rapids and Eastern Iowa handles installations, renovations, and maintenance as well as repairs and emergency plumbing. Our experienced, licensed plumbers at Benjamin Franklin Cedar Rapids and Eastern Iowa do it all..
“Intelligent Service replaced our two sump pumps, added digital float switches, and installed a digital wall unit to track the water levels and pump options. They also checked our existing battery backup for battery outputs. They improved the piping and fixed the check valves. They cleaned the sump pit and the work area. They did a terrific job. Will definitely use them again and will recommend them as well. Pleasure to work with, very responsive, knowledgeable staff, and did a good job explaining the work order prior to writing up the estimate.”
My hot water heater needed replacement. Deanna was very pleasant, knowledgeable, and most helpful. She scheduled my appointment and James M. and Aaron arrived exactly on time. They were professional and had the job done in no time! Although it was a bit more expensive than I was expecting, the service was excellent. Thank you for a job well done.
DoItYourself.com®, founded in 1995, is the leading independent home improvement and repair website. We welcome your comments and suggestions. All information is provided "AS IS." Website operating problems contact [email protected] Questions of a Do It Yourself nature should be submitted to our "DoItYourself.com Community Forums". Copyright © 1995-2018 MH Sub I, LLC dba Internet Brands. All rights reserved. You may freely link to this site, and use it for non-commercial use subject to our terms of use. View our Privacy Policy here.
Apprentice plumber: Apprenticeship programs generally provide the most comprehensive training for novice plumbers. Either union locals and their affiliated companies or nonunion contractor organizations can administer this training. Apprenticeships typically consist of at least three to four years of paid, on-the-job training and some hours of related classroom instruction.
×