When the time comes to schedule any plumbing, drain and sewer, water treatment or testing, water heater, or commercial plumbing services in Kansas City, MO, you should call our number. We offer a diverse selection of services, but would also never dream of compromising our quality of service for quantity’s sake. Give us a call today to learn more about all that we can do for you.

Plumbing Repair Company


Cast iron and ductile iron pipe was long a lower-cost alternative to copper, before the advent of durable plastic materials but special non-conductive fittings must be used where transitions are to be made to other metallic pipes, except for terminal fittings, in order to avoid corrosion owing to electrochemical reactions between dissimilar metals (see galvanic cell).[17]
Cold water alerted us that something was wrong with our 10 year old water heater. We called Atomic Plumbing on a Saturday evening and they had appointments available the very next morning! The ladies answering the phones were incredible and the system they have in place to alert you when your technician will be coming is top notch (including a picture and information about your technician in e-mail form). We found our technician, Randy, to be honest, professional and incredibly talented. He diagnosed our problem in a short amount of time, gave us several reasonable options and was able to give us a brand new water heater the next day for a great rate. Cannot say enough good things about Atomic Plumbing & Drain Cleaning and will definitely be using them in the future!
Try a plunger: If it's a double sink, use a wet rag or rubber stopper to block the other drain. Place the plunger directly over the drain until it forms an air-tight seal. If you have trouble forming an air-tight seal with the plunger, run it under some hot water to make it more flexible. Move the plunger up and down to dislodge the clog from the drain.
For 50 years, R.S. Andrews has maintained a reputation of having some of the best plumbers in Atlanta. That’s because our years of experience mean we’ve dealt with every conceivable problem, every type of plumbing system, and are familiar with every neighborhood in Atlanta all the way from the Big Chicken to the SkyView Ferris Wheel. Customers know that when we arrive, we’ll be ready to fix your plumbing problem quickly and effectively.
The Home Depot has a wide selection of high-quality plumbing parts including sump pumps, water heaters, HVAC systems, pipes and much more. The Home Depot even has eco-friendly plumbing options to help you save money and live green. If you need professional advice or installation assistance with any of your plumbing projects, turn to The Home Depot to help you finish your plumbing project. 
Bonney Plumbing, Electrical,  Heating and Air, has been your local, reliable service company since 1978.  As an A+ rated member of the Better Business Bureau, we have worked hard to build our reputation by providing you with top notch technicians, superior products and exceptional customer service.  We have serviced thousands upon thousands of satisfied, loyal customers and are so pleased to earn your referrals. You can count on Bonney for quick, reliable service and repair for your plumbing, heating and air conditioning needs.
Need Help?  Have a question or comment?1-888-827-4223Email UsGet Exclusive Offers & Expert TipsJOINTerms of UsePrivacy PolicyInterest Based AdsFor U.S. Residents Only © 2018 Ace Hardware. Ace Hardware and the Ace Hardware logo are registered trademarks of Ace Hardware Corporation. All rights reserved. For screen reader problems with this website, please call 1-888-827-4223 or email [email protected]

JAG PLUMBING PRODUCTS is very pleased to partner JAG PLUMBING PRODUCTS is very pleased to partner with BRIGGS Plumbing Products USA to act as the direct distributor of the prestigious BRIGGS and Sayco Brand line of Repair Parts. This 2-pack of Toilet tank flappers are the exact replacement required to fix your BRIGGS Toilet. JAG PLUMBING PRODUCTS strives ...  More + Product Details Close
“Don’t assume that every Mr. Fix-it advertising his services in the local Pennysaver or on Craigslist is a licensed plumber,” says one New York plumber. There is no national standard for issuing licenses. Some plumbers are licensed by the state, others by the counties they work in. Check with your local city hall or chamber of commerce. They should be able to direct you to the appropriate source for a list of licensed plumbers in your area.
The Eccotemp EZ-FLUSH System Descaler Kit is the The Eccotemp EZ-FLUSH System Descaler Kit is the answer to any water scale lime or rust deposit buildup in virtually any piece of water based equipment. The EZ-FLUSH system has been designed to work seamlessly with Tankless Water Heaters and is compact for easy use and storage. It includes our ...  More + Product Details Close
Pipe is available in rigid "joints", which come in various lengths depending on the material. Tubing, in particular copper, comes in rigid hard tempered "joints" or soft tempered (annealed) rolls. PeX and CPVC tubing also comes in rigid "joints" or flexible rolls. The temper of the copper, that is whether it is a rigid "joint" or flexible roll, does not affect the sizing.[19]
A handyman walked away from the job after cutting off the water to my mother's house and removing a toilet. He did this while I was attending a funeral. My mother is 87 years old. Called Atomic Plumbing and Ryan Dean responded Saturday afternoon and restored water to the house. He finished the job Sunday morning. He was the nicest, courteous, neat plumber I have ever met. I can't say enough good things about Atomic Plumbing from the employee who took my call to Ryan Dean's excellent service.

Cold water alerted us that something was wrong with our 10 year old water heater. We called Atomic Plumbing on a Saturday evening and they had appointments available the very next morning! The ladies answering the phones were incredible and the system they have in place to alert you when your technician will be coming is top notch (including a picture and information about your technician in e-mail form). We found our technician, Randy, to be honest, professional and incredibly talented. He diagnosed our problem in a short amount of time, gave us several reasonable options and was able to give us a brand new water heater the next day for a great rate. Cannot say enough good things about Atomic Plumbing & Drain Cleaning and will definitely be using them in the future!
PBT – flexible (usually gray or black) plastic pipe which is attached to barbed fittings and secured in place with a copper crimp ring. The primary manufacturer of PBT tubing and fittings was driven into bankruptcy by a class-action lawsuit over failures of this system.[citation needed] However, PB and PBT tubing has since returned to the market and codes, typically first for "exposed locations" such as risers.
If you have a leaking faucet in your home, it could be costing you hundreds of dollars a year on your water bills. A faulty tap can also lead to the growth of unhealthy mold and mildew. One of our expert technicians can quickly and efficiently take care of repairing or replacing that leaking faucet. We can also take care of installing or repairing any of the other plumbing fixtures in your home, including sinks toilets and showers. 

Atomic Plumbing is your first call for Virginia Beach, Chesapeake, and Norfolk plumbing needs – residential or commercial. If you have a leaky pipe or drain clog, or wish to install new bathroom fixtures, Atomic Plumbing can help. Our plumbing team is certified and trained to tackle any sewer or drainage problem, using the latest parts and equipment to repair frozen or damaged pipes or faulty water heaters.
PBT – flexible (usually gray or black) plastic pipe which is attached to barbed fittings and secured in place with a copper crimp ring. The primary manufacturer of PBT tubing and fittings was driven into bankruptcy by a class-action lawsuit over failures of this system.[citation needed] However, PB and PBT tubing has since returned to the market and codes, typically first for "exposed locations" such as risers.
It does help in regards to procedures and rules in order to better understand your options.  Obviously cost is always an issue and the size of the company probably determine the labor cost.  That is why some times people take chances with "others' hoping that there have good experience but because they are independent operators there pricing might be more flexible.
Called Atomic plumbing after kitchen was flooded with water the evening before, was given a time a technician would be out. Technician Jimmy Powell showed up early and after checking problem He went right to work. He stated he would have to cut a hole in the ceiling to get to the the drain. After some careful measurements his cut was right on target. Jimmy fixed the problem and was a true professional from start to finish. I wouldn't hesitate to call Atomic Plumbing for any plumbing needs, and would highly recommend Jimmy Powell as the technician.

Plastic pipe is in wide use for domestic water supply and drain-waste-vent (DWV) pipe. Principal types include: Polyvinyl chloride (PVC) was produced experimentally in the 19th century but did not become practical to manufacture until 1926, when Waldo Semon of BF Goodrich Co. developed a method to plasticize PVC, making it easier to process. PVC pipe began to be manufactured in the 1940s and was in wide use for Drain-Waste-Vent piping during the reconstruction of Germany and Japan following WWII. In the 1950s, plastics manufacturers in Western Europe and Japan began producing acrylonitrile butadiene styrene (ABS) pipe. The method for producing cross-linked polyethylene (PEX) was also developed in the 1950s. Plastic supply pipes have become increasingly common, with a variety of materials and fittings employed.


I was provided with tremendous service. Our technicians, Ryan and Scott, were professional and solved our problem quickly. Ryan took the time to explain what was causing our sewage line blockage and the different options that were available to us to try and resolve it. Ultimately we went with his recommendation and it worked. As far as pricing, we got our quote upfront and they charged exactly what they said they would. I would definitely use Atomic Plumbing again!
Cast iron and ductile iron pipe was long a lower-cost alternative to copper, before the advent of durable plastic materials but special non-conductive fittings must be used where transitions are to be made to other metallic pipes, except for terminal fittings, in order to avoid corrosion owing to electrochemical reactions between dissimilar metals (see galvanic cell).[17]
This information is not intended as an offer to sell, or the solicitation of an offer to buy, a franchise. It is for information purposes only. Read More Currently, the following states regulate the offer and sale of franchises: California, Hawaii, Illinois, Indiana, Maryland, Michigan, Minnesota, New York, North Dakota, Oregon, Rhode Island, South Dakota, Virginia, Washington, and Wisconsin. If you are a resident of or want to locate a franchise in one of these states, we will not offer you a franchise unless and until we have complied with applicable pre-sale registration and disclosure requirements in your state. Read Less Mr. Rooter is a registered trademark of Mr. Rooter LLC Copyright © 2017 Mr. Rooter, All rights reserved. All Mr. Rooter Plumbing Franchise Locations Are Independently Owned And Operated.
Plastic pipe is in wide use for domestic water supply and drain-waste-vent (DWV) pipe. Principal types include: Polyvinyl chloride (PVC) was produced experimentally in the 19th century but did not become practical to manufacture until 1926, when Waldo Semon of BF Goodrich Co. developed a method to plasticize PVC, making it easier to process. PVC pipe began to be manufactured in the 1940s and was in wide use for Drain-Waste-Vent piping during the reconstruction of Germany and Japan following WWII. In the 1950s, plastics manufacturers in Western Europe and Japan began producing acrylonitrile butadiene styrene (ABS) pipe. The method for producing cross-linked polyethylene (PEX) was also developed in the 1950s. Plastic supply pipes have become increasingly common, with a variety of materials and fittings employed.
×