And Berkeys licensed plumbers offer plumbing, water heater, drain and sewer repairs and services in 75001, 75006, 75007, 75010, 75019, 75038, 75039, 75062, 75063, 75080, 75081, 75082, 75234, 75248, 75252, 75287, 75061, 75060, 75201, 75202, 75203, 75204, 75205, 75206, 75207, 75208, 75209, 75210, 75211, 75212, 75214, 75215, 75216, 75217, 75218, 75219, 75220, 75221, 75222, 75223, 75224, 75225, 75226, 75227, 75228, 75229, 75230, 75231, 76092 and more. Call to confirm plumbing service for your home.
late 14c. (from c.1100 as a surname), "a worker in any sort of lead" (roofs, gutters, pipes), from Old French plomier "lead-smelter" (Modern French plombier) and directly from Latin plumbarius "worker in lead," noun use of adjective meaning "pertaining to lead," from plumbum "lead" (see plumb (n.)). Meaning focused 19c. on "workman who installs pipes and fittings" as lead water pipes became the principal concern of the trade. In U.S. Nixon administration (1969-74), the name of a special unit for investigation of "leaks" of government secrets.

Present-day water-supply systems use a network of high-pressure pumps, and pipes in buildings are now made of copper,[25] brass, plastic (particularly cross-linked polyethylene called PEX, which is estimated to be used in 60% of single-family homes[26]), or other nontoxic material. Due to its toxicity, most cities moved away from lead water-supply piping by the 1920s in the United States,[27] although lead pipes were approved by national plumbing codes into the 1980s,[28] and lead was used in plumbing solder for drinking water until it was banned in 1986.[27] Drain and vent lines are made of plastic, steel, cast-iron, or lead.[29][30]

And Berkeys licensed plumbers offer plumbing, water heater, drain and sewer repairs and services in 75001, 75006, 75007, 75010, 75019, 75038, 75039, 75062, 75063, 75080, 75081, 75082, 75234, 75248, 75252, 75287, 75061, 75060, 75201, 75202, 75203, 75204, 75205, 75206, 75207, 75208, 75209, 75210, 75211, 75212, 75214, 75215, 75216, 75217, 75218, 75219, 75220, 75221, 75222, 75223, 75224, 75225, 75226, 75227, 75228, 75229, 75230, 75231, 76092 and more. Call to confirm plumbing service for your home.

Bonney Plumbing, Electrical,  Heating and Air, has been your local, reliable service company since 1978.  As an A+ rated member of the Better Business Bureau, we have worked hard to build our reputation by providing you with top notch technicians, superior products and exceptional customer service.  We have serviced thousands upon thousands of satisfied, loyal customers and are so pleased to earn your referrals. You can count on Bonney for quick, reliable service and repair for your plumbing, heating and air conditioning needs.


The difference between pipes and tubes is simply in the way it is sized. PVC pipe for plumbing applications and galvanized steel pipe for instance, are measured in IPS (iron pipe size). Copper tube, CPVC, PeX and other tubing is measured nominally, which is basically an average diameter. These sizing schemes allow for universal adaptation of transitional fittings. For instance, 1/2" PeX tubing is the same size as 1/2" copper tubing. 1/2" PVC on the other hand is not the same size as 1/2" tubing, and therefore requires either a threaded male or female adapter to connect them. When used in agricultural irrigation, the singular form "pipe" is often used as a plural.[19]

Master plumbers on construction jobs may be involved with developing blueprints that show the placement of all the pipes and fixtures. Their input helps ensure that a structure’s plumbing meets building codes, stays within budget, and works well with the location of other features, such as electric wires. Many diagrams are now created digitally with the use of Building Information Modeling (BIM), which allows a building’s physical systems to be planned and coordinated across occupations.
Ryan arrived on time with a positive attitude even though it was after hours on a Friday and did a great job. He quickly diagnosed and fixed the plumbing problem and answered several other questions I had regarding upgrades to bathroom fixtures. I was very impressed that Atomic was able to get a technician to my house within a few hours on a Friday night a few days before Christmas. Very professional organization and technician.
The Home Depot has a wide selection of high-quality plumbing parts including sump pumps, water heaters, HVAC systems, pipes and much more. The Home Depot even has eco-friendly plumbing options to help you save money and live green. If you need professional advice or installation assistance with any of your plumbing projects, turn to The Home Depot to help you finish your plumbing project. 

When you’re searching for a dependable Dallas plumber or Dallas plumbing company “near me” which offers licensed and trained plumbers for any plumbing repair or plumbing installation like water heaters, tankless heaters, garbage disposals, drain or sewer lines, water filtration, water softening or other plumbing needs, call 214-892-2225214-892-2225.


At Oliver, our expert plumbing staff is ready to handle all of your plumbing needs. Whether you have a leaky faucet or water heater, a toilet repair, or want to replace your entire bath or shower, our plumbing and water heater services are fast, reliable, and available 24 hours a day. The following are just some of the areas in which we specialize:
Bonney Plumbing, Electrical,  Heating and Air, has been your local, reliable service company since 1978.  As an A+ rated member of the Better Business Bureau, we have worked hard to build our reputation by providing you with top notch technicians, superior products and exceptional customer service.  We have serviced thousands upon thousands of satisfied, loyal customers and are so pleased to earn your referrals. You can count on Bonney for quick, reliable service and repair for your plumbing, heating and air conditioning needs.
Cast iron and ductile iron pipe was long a lower-cost alternative to copper, before the advent of durable plastic materials but special non-conductive fittings must be used where transitions are to be made to other metallic pipes, except for terminal fittings, in order to avoid corrosion owing to electrochemical reactions between dissimilar metals (see galvanic cell).[17]
Our plumbers are licensed, bonded, and insured and meet our rigid trust certification standards. Our services are guaranteed in writing against defects in materials and workmanship. So if you need to repair, maintain, or improve your plumbing or septic system, you can rely on Parker & Sons. Our plumbing service includes a 100% money back guarantee and our customer care policies are unmatched in the industry.

Did you know that your tap water might contain traces of such harmful chemicals as lead, arsenic, cadmium, and pesticides? High levels of these and other toxins commonly found in drinking water are known to cause disease and damage organs. Having either a reverse osmosis or carbon-based water filtration system professionally installed by Baker Brothers Plumbing, Air Conditioning & Electrical is a great way to safeguard the health of your family by virtually eliminating the toxins in your tap water. Soon, you will find the water coming from your tap is pure and tastes clean, meaning you can use it for drinking, cooking, bathing, and laundry without issue.
Wooden pipes were used in London and elsewhere during the 16th and 17th centuries. The pipes were hollowed-out logs, which were tapered at the end with a small hole in which the water would pass through.[16] The multiple pipes were then sealed together with hot animal fat. They were often used in Montreal and Boston in the 1800s, and built-up wooden tubes were widely used in the USA during the 20th century. These pipes, used in place of corrugated iron or reinforced concrete pipes, were made of sections cut from short lengths of wood. Locking of adjacent rings with hardwood dowel pins produced a flexible structure. About 100,000 feet of these wooden pipes were installed during WW2 in drainage culverts, storm sewers and conduits, under highways and at army camps, naval stations, airfields and ordnance plants.
Using corrosive chemicals to dissolve a clog is like throwing a grenade down a gopher hole. Instead, Wroblewski recommends flushing your drains weekly with a half cup of baking soda and one cup of vinegar. Let it fizz in the drain for ten minutes, then pour in four cups of boiling water. Find out about the plumbing nightmares that will make you cringe.
We have used Atomic multiple times and every time they have done a phenomenal job! We've had 2 different plumbing specialist, both named Justin, and each have been wonderful and knowledgeable in helping us with our problems. Our most recent issue was a leaking service line. Atomic had Justin D. to my house at 7pm, and was able to schedule me for next day repairs! I will only use and recommend Atomic as my plumbing service!
Much of the plumbing work in populated areas is regulated by government or quasi-government agencies due to the direct impact on the public's health, safety, and welfare. Plumbing installation and repair work on residences and other buildings generally must be done according to plumbing and building codes to protect the inhabitants of the buildings and to ensure safe, quality construction to future buyers. If permits are required for work, plumbing contractors typically secure them from the authorities on behalf of home or building owners.[citation needed]

As important as it is that you are able to distribute potable water throughout your home in a dependable manner, it would be a much less convenient state of affairs if you were not also able to dispose of that water just as conveniently, not to mention hygienically. That is why we suggest allowing our Master Plumbers to complete any and all drain and sewer services that you may require. From basic cleanings to complex repairs and eventual replacements, we truly do it all. If you have any reason to suspect a problem with your drain and sewer system, give us a call right away.
The straight sections of plumbing systems are called "pipes" or "tubes". A pipe is typically formed via casting or welding, whereas a tube is made through extrusion. Pipe normally has thicker walls and may be threaded or welded, while tubing is thinner-walled and requires special joining techniques such as brazing, compression fitting, crimping, or for plastics, solvent welding. These joining techniques are discussed in more detail in the piping and plumbing fittings article.
PBT – flexible (usually gray or black) plastic pipe which is attached to barbed fittings and secured in place with a copper crimp ring. The primary manufacturer of PBT tubing and fittings was driven into bankruptcy by a class-action lawsuit over failures of this system.[citation needed] However, PB and PBT tubing has since returned to the market and codes, typically first for "exposed locations" such as risers.
Westbrook knows that quality construction starts with quality plumbing. Our design build experts use the latest techniques and technology to ensure that every building is fitted, piped and pressurized for maximum water flow and efficiency. With Westbrook’s team of plumbing experts, you can be sure that any new building won’t go without clean and safe water service.
"We just moved to a new house and Luke did an amazing job installing our home entertainment system. We thought we had a simple TV mounting project, but Luke was able to connect all our equipment (some of which was a bit outdated) so we have one seamless audio/visual system. Plus he was able to fix some errors that Comcast had made and willing to jump in and work on a few other small projects I needed done before the holidays. His price was reasonable and in the week since he performed the work I've had 2 people knowledgeble in contracting or wiring compliment the quality of his work."

Plumbers are expensive because it is a highly specialized trade requiring thousands of hours to master. Additionally, they make house calls meaning they spend time and money investing in vehicles, tools, equipment and gas to bring to you. They also carry insurance and have other overhead expenses. Labor shortages in the field also contribute to premium pricing.
Another way to avoid a service call from your plumber is to make sure the outside faucets are turned off in the winter and make sure you disconnect the outside hoses. You need to shut the water off from the inside. Then, open the valve on the outside to let the water that’s in there drain out—you switch both of them to the opposite direction so one is always closed and one is always open. We have to fix tons of these in the spring mostly because people leave their outside hoses connected and they freeze up. The repair could cost $100-$200 or more. Another tip would be if you’re going away for any length of time, like on vacation, turn off your water. If on any of those days the temperature drops below freezing, have someone check in on your house. I’ve been called to homes where the family returned from vacation, and there was water flooding out from the front door.

Westbrook knows that quality construction starts with quality plumbing. Our design build experts use the latest techniques and technology to ensure that every building is fitted, piped and pressurized for maximum water flow and efficiency. With Westbrook’s team of plumbing experts, you can be sure that any new building won’t go without clean and safe water service.


Faucets for the kitchen come in an array of styles, and costs vary as well, from simple single handle models running less than $50 to pull down faucets like those used in restaurant kitchens costing more than $200. One handle or two, separate pullout sprayer or pull down, countertop or wall mount, these also feature a variety of finishes from stainless steel to nickel and bronze.
The straight sections of plumbing systems are called "pipes" or "tubes". A pipe is typically formed via casting or welding, whereas a tube is made through extrusion. Pipe normally has thicker walls and may be threaded or welded, while tubing is thinner-walled and requires special joining techniques such as brazing, compression fitting, crimping, or for plastics, solvent welding. These joining techniques are discussed in more detail in the piping and plumbing fittings article.

If you have a leaking faucet in your home, it could be costing you hundreds of dollars a year on your water bills. A faulty tap can also lead to the growth of unhealthy mold and mildew. One of our expert technicians can quickly and efficiently take care of repairing or replacing that leaking faucet. We can also take care of installing or repairing any of the other plumbing fixtures in your home, including sinks toilets and showers.

I have used atomic a couple of times and have received nothing but great service! When we first bought our house, we hadn't moved to the area yet and weren't moving for another month. We drove down for a weekend to get the A.C. replaced, and found the sink in the master bath (that the previous owner just had installed) had flooded the whole bedroom. I believe it was Eric who helped us, and he was wonderful. Despite it being July, and no A.C, he took care of us without complaint. And because we were going back home in the next couple days he made sure to get it done quickly!Recently we decided to replace our water heater and didn't hesitate to call Atomic. Ryan and Zach helped us this time and provided the same level of service I expected! They were polite, clean and made sure everything went smoothly. Atomic is definitely a little pricer than some smaller companies, but you get what you pay for and I'd rather pay to get it done correctly the first time than later when your water line snaps in the master bathroom and you're out of town.
To work independently, a plumber is required to receive a license. In most states, the prerequisite for earning this license is two to five years of practical experience. There's also an exam to test technical know-how and understanding of plumbing codes. The United Association's website offers extensive information on licensing requirements by state.
Cast iron and ductile iron pipe was long a lower-cost alternative to copper, before the advent of durable plastic materials but special non-conductive fittings must be used where transitions are to be made to other metallic pipes, except for terminal fittings, in order to avoid corrosion owing to electrochemical reactions between dissimilar metals (see galvanic cell).[17]
There’s often an Allen wrench that comes with the garbage disposal. I keep it under the sink. When the thing jams, follow the directions in the manual, and I won’t need to come out. Another plumbing tip, don’t believe the myth about putting lemon peels in the disposal to make it smell better. That will just make it jam faster.  These are the things you should never pour down the drain.
Payment schedule: On a big job, especially a planned remodeling, the service provider may want the customer to pay 10 to 15 percent of the cost up front and 50 percent paid before the job is completed — especially if expensive materials need to be purchased for the project. Make sure you know what is expected. If you're suspicious, contact your state's professional licensing board or contracting board to ask about local standards. Many states set limits on what is allowed to be paid upfront.

I've used Atomic Plumbing for several years now. Most recently this week. I had a leaking main supply line under my driveway which was a laborious repair that required cutting my concrete driveway and digging down several feet to access the leak. My technician, Sean and his partner, Paul did an AWESOME job. They arrived on time, gave me a fair quote for the work, and began the repair process immediately. They were incredibly friendly and kept me abreast of the situation every step of the way.Like my previous experiences with Atomic, this one was professional and the final bill was slightly less than what they quoted me thanks to Atomic's military and veteran discount.If you need a plumber you will be well served to call Atomic.
James and Paul did an AWESOME job from start to finish with our toilet replacement and installation!! We unfortunately had a bad experience with our general contractor and his plumber and needed immediate assistance. I called Atomic and they immediately got me connected with a scheduler, then had James and Paul out to our house extremely fast! James and Paul were friendly, knowledgeable, professional, and efficient. They advised us based on their expertise and helped us pick out a new toilet and install it correctly. We are so grateful for their work and their professionalism. Would highly recommend them and hire them again!

Plumbing Service Co

×