Justin D and Eric worked on four leaky spots in one afternoon replacing toilet parts, bathroom sink fixtures, shower fixtures and an ancient outdoor spigot that required going into the crawl space. All were done efficiently and with detailed explanations. Additionally, each work area was left completely cleaned up. I appreciate that they also alerted me to a duct work problem under the house which I may not have discovered for some time. My parents, also customers, and I are happy to give a big thumbs up to Atomic Plumbing. Thank you Justin D and Eric! Good team!
Plumbers install and repair water, drainage, gas, and other piping systems in homes, businesses, and factories. Plumbers install plumbing fixtures such as bathtubs and toilets, and appliances, such as dishwashers and water heaters. Plumbers also maintain septic systems—the large, underground holding tanks that collect waste from houses that are not connected to a sewer system. Click Here for Plumber Repair Denver
“We had a toilet emergency one morning. After unsuccessful plunging efforts, we called Intelligent Service – and within 20 minutes, they were at our house. They found that the sewer line from our house to the street had snapped. Within 2 hours they had a permit and a backhoe in our front yard, and started work. By 5:00pm, we had water! They were extremely sympathetic to our situation. They were careful not to track snow and mud into the house. They cleaned up the area both inside and outside. Have already recommended the company to the many neighbors.”
“Don’t assume that every Mr. Fix-it advertising his services in the local Pennysaver or on Craigslist is a licensed plumber,” says one New York plumber. There is no national standard for issuing licenses. Some plumbers are licensed by the state, others by the counties they work in. Check with your local city hall or chamber of commerce. They should be able to direct you to the appropriate source for a list of licensed plumbers in your area.
The ApolloPEX Stainless Steel PEX 1-Hand Pinch Clamp The ApolloPEX Stainless Steel PEX 1-Hand Pinch Clamp Tool provides extreme versatility. It is designed for the creating secure stainless steel pinch clamp connections in combination with PEX barb fittings within PEX piping systems in sizes ranging from 3/8 in. to 1 in. The ApolloPEX Stainless Steel PEX 1-Hand Pinch ...  More + Product Details Close
Wall thickness does not affect pipe or tubing size.[20] 1/2" L copper has the same outer diameter as 1/2" K or M copper. The same applies to pipe schedules. As a result, a slight increase in pressure losses is realized due to a decrease in flowpath as wall thickness is increased. In other words, 1 foot of 1/2" L copper has slightly less volume than 1 foot of 1/2 M copper.[citation needed]

Jimmy P removed a 6 inch diameter root that had grown around my main water line. He was diligent in finding our the cause of the leak, kept me informed throughout the process and made sure that I was up and running with water for my family in less than an 8 hour period. It was a huge undertaking. Jimmy P was first class and polite . The had the necessary experience that was needed to get this water main break under control. He made the best of a horrible situation. Extremely pleasant and talented. I would highly suggest that all of my friends request Jimmy P at ATOMIC!
There’s often an Allen wrench that comes with the garbage disposal. I keep it under the sink. When the thing jams, follow the directions in the manual, and I won’t need to come out. Another plumbing tip, don’t believe the myth about putting lemon peels in the disposal to make it smell better. That will just make it jam faster.  These are the things you should never pour down the drain.
Plastic pipe is in wide use for domestic water supply and drain-waste-vent (DWV) pipe. Principal types include: Polyvinyl chloride (PVC) was produced experimentally in the 19th century but did not become practical to manufacture until 1926, when Waldo Semon of BF Goodrich Co. developed a method to plasticize PVC, making it easier to process. PVC pipe began to be manufactured in the 1940s and was in wide use for Drain-Waste-Vent piping during the reconstruction of Germany and Japan following WWII. In the 1950s, plastics manufacturers in Western Europe and Japan began producing acrylonitrile butadiene styrene (ABS) pipe. The method for producing cross-linked polyethylene (PEX) was also developed in the 1950s. Plastic supply pipes have become increasingly common, with a variety of materials and fittings employed.
If something goes wrong with your plumbing system, it usually is something that needs to be fixed immediately—plumbing problems won’t wait until normal business hours to start causing damage to your home or property. Clogged drains can incapacitate your ability to use your toilet, garbage disposal, or shower, leaky toilets can send you to the gas station down the street, and backed-up sewer lines can leave you with a flooded basement or wet yard—any of these situations can ruin your day if you don’t get help quickly. No one wants that! What’s more, not addressing plumbing problems quickly can lead to more costly repairs later and not immediately evident issues like mold down the road.

Plumbers in Australia have licensing requirements that differ from state to state but it is generally accepted a 4-year apprenticeship with a further minimum experience of 2 years (6 years total) and a further curricular requirement as a benchmark for licensing. Licensed plumbers are also expected to maintain minimum relevant training requirements to maintain their plumbing license


My hot water heater ruptured at 2030 on a Tuesday and Justin along with Trey were at my house at 0830 the next morning. They were consummate professionals the entire time they were in my garage. They were courteous and polite and worked as hard as they could on a difficult removal and replacement. I can't thank them and Atomic Pluming enough. I'll call them for anything in the future and you should too!
PVC/CPVC – rigid plastic pipes similar to PVC drain pipes but with thicker walls to deal with municipal water pressure, introduced around 1970. PVC stands for polyvinyl chloride, and it has become a common replacement for metal piping. PVC should be used only for cold water, or for venting. CPVC can be used for hot and cold potable water supply. Connections are made with primers and solvent cements as required by code.[22]
Baker Brothers Plumbing offers both residential and commercial plumbing services including tank and tankless water heater replacement and maintenance; drain and sewer repairs or replacement; drain cleaning, clearing and jetting; pipe lining and pipe replacement; repipe; gas line repair; slab leak detection and slab leak repair; bathroom and kitchen faucet installation; garbage disposal repair and installation; and most general plumbing repairs in most or all of the following Dallas, TX ZIP Codes: 75229, 75230, 75225, 75220, 75209, 75219, 75247, 75212, 75235, 75201, 75207, 75248, 75287, 75252, 75244, 75254, 75240, 75251, 75248-1713, 75214, 75228, 75243, 75238, 75218, 75206, 75231, 75204, 75226, 75246, 75227, 75208, 75217, 75232, 75224, 75211, 75241, 75215, 75233, 75253, 75216, 75223, 75237, 75249, 75203, 75210
Plumbers in Australia have licensing requirements that differ from state to state but it is generally accepted a 4-year apprenticeship with a further minimum experience of 2 years (6 years total) and a further curricular requirement as a benchmark for licensing. Licensed plumbers are also expected to maintain minimum relevant training requirements to maintain their plumbing license
I was provided with tremendous service. Our technicians, Ryan and Scott, were professional and solved our problem quickly. Ryan took the time to explain what was causing our sewage line blockage and the different options that were available to us to try and resolve it. Ultimately we went with his recommendation and it worked. As far as pricing, we got our quote upfront and they charged exactly what they said they would. I would definitely use Atomic Plumbing again!
Each Government at the state level has their own Authority and regulations in place for licensing plumbers. They are also responsible for the interpretation, administration and enforcement of the regulations outlined in the NCC.[38] These Authorities are usually established for the sole purpose of regulating plumbing activities in their respective states/territories. However, several state level regulation acts are quite outdated, with some still operating on local policies introduced more than a decade ago. This has led to an increase in plumbing regulatory issues not covered under current policy, and as such, many policies are currently being updated to cover these more modern issues. The updates include changed to the minimum experience and training requirements for licensing, additional work standards for new and more specific kinds of plumbing, as well as adopting the Plumbing Code of Australia into state regulations in an effort to standardise plumbing regulations across the country.[39]

Justin D and Eric worked on four leaky spots in one afternoon replacing toilet parts, bathroom sink fixtures, shower fixtures and an ancient outdoor spigot that required going into the crawl space. All were done efficiently and with detailed explanations. Additionally, each work area was left completely cleaned up. I appreciate that they also alerted me to a duct work problem under the house which I may not have discovered for some time. My parents, also customers, and I are happy to give a big thumbs up to Atomic Plumbing. Thank you Justin D and Eric! Good team!
Called in on Wednesday evening to schedule a new sink hookup and was put on the schedule for Friday morning with no problems. Ryan arrived and took a look at what I had, gave some recommendations and provided a couple quotes. He took his time and made sure everything he installed was the most efficient and correct for my setup. We will continue to use and strongly recommend Atomic Plumbing.
×